GFRP mesh HARDmesh® is innovative alternate and substitute to steel wire mesh

It is a perfect material for brick laying! HARDmesh is non-corrosive coilmesh!


TM HARDmesh GFRP mesh is a composite polymer mesh based on glass fiber and with sand coating for higher adhesion to concrete. HARDmesh can substitute steel wire mesh!

Does not rust

Cheaper than steel

Increases building life by 3 times

Over 1 270 000 sqm of HARDmesh GFRP mesh have been applied while construction


HARDmesh GFRP mesh is fiberglass mesh based onglass fiber and epoxy resin. While it is production an additional layer of sand is applied to improve adhesion to concrete. It replaces steel wire mesh and is available in coils, non-corrosive, 5 times lighter than steel, 2 times stronger than steel, conducts no heat. Available sizes: 50x50 and 100x100 with diameter ranging 2-4 mm. GFRP mesh with a smaller diameter can substitute steel wire mesh!
HARDmesh GFRP mesh showed and proved high efficiency while plaster reinforcing in industrial and warehouse premises. Due to low thermal conductivity, which is about 100 times lower than steel, costsforbuilding heating are significantlyreduced!

HARDmesh 100х100x2mm

HARDmesh 50х50x2mm


Reliability is HARDmesh GFRP mesh with sand coating!

HARDmesh GFRP mesh

High-loaded foundation casting or filling
Port construction
In laying brick
Private construction
Tunnel construction
Pool construction
Industrial construction
Airport construction
Bridge construction

HARDmesh GFRP mesh specification chart


Due to the fact that GFRP rebar is 2-2.5 times stronger at break, GFRP rebar with a smaller diameter can substitute steel bars:

GFRP HARDmesh Steel wire mesh Properties Steel wire mesh GFRP HARDmesh
2 mm 3 mm ultimate tensile strength 550-570 МPа 800-1300 МPа
3 mm 5 mm width 0,38 – 1 m 0,38 – 1,2 m
4 mm 6 mm bar breaking strength 400-720 kgf 600-950 kgf
thermal conductivity ratio 56 W/(m0°C) 0.35 W/(m0°C)
linear expansion ration 13-15 ах-5//°C 9-12 ах-5//°C
square unit weight 2220 kg/m3 360 kg/m3
electrical conductivity highly conductive non-conductive
resistance to aggressive environment corrosible and low resistant corrosion and acid resistant
NON-CORROSIVE
COST EFFECTIVE
LIFETIME OF OVER 80 YEARS
TWICE STRONGER than steel bars
CONDUCTS NO HEAT
9 TIMES LIGHTER than steel bars
TRANSPORTATION IN COILS OR ROLLS
RADIOWAVE TRANSPARENT
CONDUCTS NO ELECTRICITY
NON-MAGNETIZABLE
IDEAL FOR BRICK LAYING
EASY LAYING

Feedback on cooperation with the plant

Отзыв от ООО “Гал-Экспоторг”

Отзыв от ООО “Минтекс”

Отзыв от ООО “ВБК”

Отзыв от ООО “МУР”

Documents on GFRP HARDmesh

Patent HARDmesh

Certificate of сonformity

SES Certificate

Certificate of сonformity

Diameter mesh Total quantity in a coil/roll Coil/roll diameter Coil/roll weight
2 mm 60 m2 0,65 m до 15 kg
3 mm 60 m2 0,65 m до 25 kg
4 mm 60 m2 0,70 m до 32 kg

GFRP mesh HARDmesh delivery

Since steel wire mesh is delivered in sheets and has much weight, then a truck or lorry with high loading capacity will be required for transportation, it will also require several loaders or handlers if the purpose is to load and unload quickly.

At the same time, GFRP mesh HARDmesh delivery will require just a car with low loading capacity, since GFRP mesh weight is 9 times lower than of steel wire mesh! It will also require 1 person for fast loading and unloading, as GFRP mesh is delivered in coils and such a coil of 60 sq. m. can be easily lifted even by a child. As a result, delivery turns out to be significantly cost effective and easy!

Patents for HARDplus and LIGHTplus GFRP rebar, HARDmesh GFRP mesh

GFRP mesh HARDmesh

Rebar LIGHTplus

Rebar HARDplus

HARDmesh GFRP mesh with sand coating is 2 times safer and more reliable! Moreover, it is corrosion resistant, conducts no heat, it is 5 times lighter, delivered in coils, it is radio transparent, more cost effective, it has the same expansion module as concrete, conducts no electricity, it is much stronger at break.

Difference of GFRP HARDmesh from composite mesh LIGHTmesh

GFRP HARDmesh

GFRP LIGHTmesh

GFRP mesh HARDmesh has special quartz coating, which increases adhesion to concrete and results in advanced efficiency of concrete and mesh interaction..

Video: Helpful information

Video: GFRP mesh instruction

GFRP mesh HARDmesh has special quartz coating and 100% adhesion to concrete! What are the benefits of it?:

High loads application

Wide application in critical structures

100% adhesion to concrete

Even load distribution


HARDmesh GFRP mesh is the best solution for your building!

Moreover, it is corrosion resistant, conducts no heat, it is 5 times lighter, delivered in coils,it is radio transparent, more cost effective, it has the same expansion module as concrete, conducts no electricity, it is much stronger at break.

NON-CORROSIVE

COST EFFECTIVE

LIFETIME OF OVER 80 YEARS

TWICE STRONGER than steel bars

"">

CONDUCTS NO HEAT

9 TIMES LIGHTER than steel bars

TRANSPORTATION IN COILS OR ROLLS

RADIOWAVE TRANSPARENT

CONDUCTS NO ELECTRICITY

NON-MAGNETIZABLE

IDEAL FOR BRICK LAYING

EASY LAYING