ABOUT OUR PLANT
Ukrainian Corporate Group «IMPERATYV» has 2 integrated manufacturing plants with complete production cycle. Plant No. 1 manufactures GFRP rebar HARDplus® and LIGHTplus®, plant supports and stakes LIGHTgreen®, GFRP rebar LIGHTstem® for greenhouse, thermal insulation anchor TERMOhard®, mine anchor LIGHTbar®. It manufactures over 1 500 000 lin.m. of GFRP rebar per month. Maximum plant capacity is over 3 800 000 lin.m. of GFRP rebar per month.
WE MANUFACTURE
GFRP rebar LIGHTplus® is traditional glass fiber reinforced polymer rebar with die rolling profile and deformed section. This GFRP rebar type has 83% adhesion to concrete and is applicable for low loads.
GFRP rebar HARDplus® is glass fiber reinforced polymer rebar of new generation, which has 100% adhesion to concrete. Due to high adhesion to concrete the load is distributed evenly over GFRP rebar rod, which allows to withstand significant loads. This GFRP rebar type is applicable for high-loaded structures and is more reliable than traditional GFRP rebar.
Ukrainian Corporate Group «IMPERATYV» has 2 integrated manufacturing plants with complete production cycle. Plant No. 2 manufactures GFRP meshes HARDmesh® and LIGHTmesh®. It manufactures over 85 000 sq.m. of GFRP mesh per month. Maximum plant capacity is over 150 000 sq.m. of GFRP mesh per month.
WE MANUFACTURE
GFRP mesh LIGHTmesh® is advanced alternate and substitution of steel wire mesh. It does not corrode, it is 9 times lighter, it does not conduct heat, it is delivered in coils or rolls, its ultimate tensile strength is twice as high as steel wire mesh.
GFRP mesh HARDmesh® is GFRP mesh with sand coating. Due to high adhesion to concrete this GFRP mesh type is a more reliable alternate to steel wire mesh. It does not corrode and is delivered in coils or rolls the same as LIGHTmesh.
GFRP mesh LIGHTmesh® is non-corrosive alternate and substitute to steel wire mesh
Non-corrosive replacement of steel wire mesh
LIGHTmesh is a guarantee of your house durability!
TM LIGHTmesh GFRP mesh is a composite polymer mesh based on glass fiber and epoxy resin!Unique construction properties of reinforcement mesh made it No. 1 in the world of brick and floor reinforcement!
LIGHTmesh GFRP mesh has been applied while reinforcement ofover 5 000 000 sqm of floors
LIGHTmesh GFRP mesh is fiberglass mesh based onglass fiber and epoxy resine. It replaces steel wire mesh and is available in coils, non-corrosive, 5 times lighter than steel, 2 times stronger than steel, conducts no heat. Available sizes: 50x50 and 100x100 with diameter ranging 2-4 mm. GFRP mesh with a smaller diameter can substitute steel wire mesh!
Durability of your construction is LIGHTmesh GFRP mesh!
LIGHTmesh GFRP mesh
Application
Specifications
Advantages
Object photos
Reference
Documents
Packaging
Delivery
Patents
High-loaded foundation casting or filling
Port construction
In laying brick
Private construction
Tunnel construction
Pool construction
Industrial construction
Airport construction
Bridge construction
LIGHTmesh GFRP mesh specification chart
Due to the fact that GFRP rebar is 2-2.5 times stronger at break, GFRP rebar with a smaller diameter can substitute steel bars:
| GFRP LIGHTmesh | Steel wire mesh | Properties | Steel wire mesh | GFRP LIGHTmesh |
|---|---|---|---|---|
| 2 mm | 3 mm | ultimate tensile strength | 550-570 МPа | 800-1300 МPа |
| 3 mm | 5 mm | width | 0,38 – 1 m | 0,38 – 1,2 m |
| 4 mm | 6 mm | bar breaking strength | 400-720 kgf | 600-950 kgf |
| thermal conductivity ratio | 56 W/(m0°C) | 0.35 W/(m0°C) | ||
| linear expansion ration | 13-15 ах-5//°C | 9-12 ах-5//°C | ||
| square unit weight | 2220 kg/m3 | 360 kg/m3 | ||
| electrical conductivity | highly conductive | non-conductive | ||
| resistance to aggressive environment | corrosible and low resistant | corrosion and acid resistant |
NON-CORROSIVE
COST EFFECTIVE
LIFETIME OF OVER 80 YEARS
TWICE STRONGER than steel bars
CONDUCTS NO HEAT
9 TIMES LIGHTER than steel bars
TRANSPORTATION IN COILS OR ROLLS
RADIOWAVE TRANSPARENT
CONDUCTS NO ELECTRICITY
NON-MAGNETIZABLE
IDEAL FOR BRICK LAYING
EASY LAYING
Feedback on cooperation with the plant
Отзыв от ООО “Гал-Экспоторг”
Отзыв от ООО “Минтекс”
Отзыв от ООО “ВБК”
Отзыв от ООО “МУР”
Documents on GFRP LIGHTmesh
Patent LIGHTmesh
Certificate of сonformity
SES Certificate
Exhibition сertificate
| Diameter mesh | Total quantity in a coil/roll | Coil/roll diameter | Coil/roll weight |
|---|---|---|---|
| 2 mm | 60 m2 | 0,65 m | до 15 kg |
| 3 mm | 60 m2 | 0,65 m | до 25 kg |
| 4 mm | 60 m2 | 0,70 m | до 32 kg |
GFRP mesh LIGHTmesh delivery
Since steel wire mesh is delivered in sheets and has much weight, then a truck or lorry with high loading capacity will be required for transportation, it will also require several loaders or handlers if the purpose is to load and unload quickly.
At the same time, GFRP mesh LIGHTmesh delivery will require just a car with low loading capacity, since GFRP mesh weight is 9 times lower than of steel wire mesh! It will also require 1 person for fast loading and unloading, as GFRP mesh is delivered in coils and such a coil of 60 sq. m. can be easily lifted even by a child. As a result, delivery turns out to be significantly cost effective and easy!
Patents for HARDplus and LIGHTplus GFRP rebar, LIGHTmesh GFRP mesh
GFRP mesh LIGHTmesh
Rebar LIGHTplus
Rebar HARDplus
LIGHTmesh GFRP mesh with sand coating is 2 times safer and more reliable! Moreover, it is corrosion resistant, conducts no heat, it is 5 times lighter, delivered in coils, it is radio transparent, more cost effective, it has the same expansion module as concrete, conducts no electricity, it is much stronger at break.
Video: Helpful information
Video: GFRP mesh instruction
